Recent Articles
How To Update Your DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 or DI-4718B Firmware
This article pertains to the DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 and DI-4718B. On occasion, especially if it's been a while since you purchased your data logger, it may be necessary to update the firmware (low-level software ...
USB Device "Quits"
USB device stops operations and WinDaq provides an error similar to the following: Visit https://www.dataq.com/blog/data-acquisition/di-device-quit-now/ for resolution.
Virtual COM Ports
Some Instruments use a Virtual COM Port to communicate with your computer. Such instruments will have an alternate connection, for example a USB connection. When installing, you should have noticed that two drivers were installed to your computer - a ...
Device Drivers for ActiveX
Some hardware models are installed with virtual com ports, so if you have more than one DATAQ unit installed on your device then the driver may be different from the default. Below is a list of the most common devices with their drivers. Please post ...
Calibration of DATAQ Instruments Data Acquisition and Data Logger Products
DATAQ Instruments offers calibration services for most data acquisition and data logger products. Products usually include NIST-traceable calibration certificates upon initial purchase. To order a re-calibration of your DATAQ hardware, follow the ...