Connection and Calibration of DI-8B38 Series Strain Gage Modules
This application note demonstrates the proper connection and calibration of a strain-gage based transducer connected to a DI-8B38 series amplifier. Currently, only the DI-718B, DI-718Bx, and DI-788 products support DI-8B series amplifiers.
Read the full article at: http://www.dataq.com/blog/faqs/connection-calibration-strain-gage-based-transducers-using-di-8b38-series-amplifiers/
Related Articles
Connection and Calibration of DI-8B47 Series Thermocouple Modules
Learn how to connect and calibration DI-8B47 modules to your DI-718B, DI-718Bx, or DI-788 data acquisition device. Read the full article ...
Trouble Communicating With Your Ethernet Connected DI-720 or DI-730 EN-B
Can't get your DI-720/730 series Ethernet Instrument to show up in the DATAQ IP Manager on your Windows 7, 8 or 8.1 machine? See our Ethernet communication troubleshooting guide.
How To Update Your DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 or DI-4718B Firmware
This article pertains to the DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 and DI-4718B. On occasion, especially if it's been a while since you purchased your data logger, it may be necessary to update the firmware (low-level software ...
EL-USB Series Data Loggers and Calibration
Read our blog post to help decide whether or not you need to order and NIST-traceable calibration certificate with your Lascar Data ...
Calibration of DATAQ Instruments Data Acquisition and Data Logger Products
DATAQ Instruments offers calibration services for most data acquisition and data logger products. Products usually include NIST-traceable calibration certificates upon initial purchase. To order a re-calibration of your DATAQ hardware, follow the ...