Connection and Calibration of DI-8B47 Series Thermocouple Modules
Learn how to connect and calibration DI-8B47 modules to your DI-718B, DI-718Bx, or DI-788 data acquisition device.
Read the full article at: http://www.dataq.com/blog/data-acquisition/thermocouple-data-acquisition/how-to-connect-and-calibrate-thermocouples-using-di-8b47-series-amplifiers/
Related Articles
Connection and Calibration of DI-8B38 Series Strain Gage Modules
This application note demonstrates the proper connection and calibration of a strain-gage based transducer connected to a DI-8B38 series amplifier. Currently, only the DI-718B, DI-718Bx, and DI-788 products support DI-8B series amplifiers. Read the ...
Trouble Communicating With Your Ethernet Connected DI-720 or DI-730 EN-B
Can't get your DI-720/730 series Ethernet Instrument to show up in the DATAQ IP Manager on your Windows 7, 8 or 8.1 machine? See our Ethernet communication troubleshooting guide.
EL-USB Series Data Loggers and Calibration
Read our blog post to help decide whether or not you need to order and NIST-traceable calibration certificate with your Lascar Data ...
How To Update Your DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 or DI-4718B Firmware
This article pertains to the DI-1100, DI-1110, DI-2108, DI-2108-P, DI-4108, DI-4208 and DI-4718B. On occasion, especially if it's been a while since you purchased your data logger, it may be necessary to update the firmware (low-level software ...
Calibration of DATAQ Instruments Data Acquisition and Data Logger Products
DATAQ Instruments offers calibration services for most data acquisition and data logger products. Products usually include NIST-traceable calibration certificates upon initial purchase. To order a re-calibration of your DATAQ hardware, follow the ...