Hardware Device not listed in the WinDaq/XL "Select the WinDaq Device" box

Some devices will not allow you to run WinDaq/XL directly from Microsoft/XL in real time unless accessed from WinDaq Acquisition software.

Solution:

1. Close Microsoft Excel

2. Open WinDaq Acquisition.

3. Click on View > Add-ons > WinDaq/XL. Microsoft Excel will open a new instance.

4. Click on the Start button in the WinDaq/XL toolbar.

5. Your device should now be in the list. If not, please fill out a support ticket.

• Related Articles

• Device Drivers for ActiveX

  Some hardware models are installed with virtual com ports, so if you have more than one DATAQ unit installed on your device then the driver may be different from the default. Below is a list of the most common devices with their drivers. Please post ...

• Getting Started with WinDaq/XL

  Microsoft Excel is one of the most widely recognized and understood spreadsheet applications in the world. WinDaq/XL is an add-in for use with Microsoft Excel: https://www.dataq.com/products/windaq/windaqxl/product.html WinDaq/XL allows users of ...

• USB Device "Quits"

  USB device stops operations and WinDaq provides an error similar to the following: Visit https://www.dataq.com/blog/data-acquisition/di-device-quit-now/ for resolution.

• How to import recorded data to Excel with WinDaq/XL

  This application note demonstrates 3 ways to get your data from a DATAQ Instruments hardware device to Microsoft Excel. A few examples are included to illustrate just how useful these features are. In addition, a brief procedure will guide you ...

• VBA and WinDaq/XL

  This article explains how to use VBA with WinDaq/XL and Microsoft Excel, including: How do I add DATAQ ActiveX controls to my project in Excel - Visual Basic for Applications? How do I Control WinDaq/XL from VBA? Follow this link to read the full ...